ONdrugDelivery - Page 9 of 62 - ONdrugDelivery - drug delivery industry specialised b2b information

Product Showcase: CCBio’s Omega & Salus Pen Injectors

Product Showcase: CCBio’s Omega & Salus Pen Injectors

CCBio showcases two multidose injection devices with non-replaceable containers – the multi-dose pen, Omega, and the single-dose autoinjector, Salus.

ACQUIRING A LIQUID BIOPSY INCIDENTAL TO INTRAVITREAL INJECTION

Dr Alex Tumlinson

Twenty/Twenty Therapeutics

ACQUIRING A LIQUID BIOPSY INCIDENTAL TO INTRAVITREAL INJECTION

Alexandre Tumlinson introduces Twenty/Twenty Therapeutics' VitreoDx injection system to address emerging trends in intravitreal therapeutics.

NEEDLESTICK INJURY RISKS: SAFEGUARDING HEALTHCARE WORKERS AND PATIENTS

Dr Fred Metzmann

NEEDLESTICK INJURY RISKS: SAFEGUARDING HEALTHCARE WORKERS AND PATIENTS

Fred Metzmann discusses how using safety syringes can be a cost-effective measure to reduce the risk of injury to healthcare personnel and patients, and introduces the company’s devices designed for safer drug administration.

IN THE THICK OF IT: ACCELERATING THE MIXING AND DELIVERY OF HIGH-VISCOSITY INJECTABLES

Dr Brent Buchine

Windgap Medical

IN THE THICK OF IT: ACCELERATING THE MIXING AND DELIVERY OF HIGH-VISCOSITY INJECTABLES

Brent Buchine, Miriam Silton, Jameson Woods and Andrew Ryan explore how the combination of gas power and a side-by-side cartridge configuration increases the working viscosity range for the mixing and delivery of complex injectable formulations.

TECHNOLOGICAL ADVANCEMENTS TO OVERCOME VISCOSITY CHALLENGES FOR INJECTABLE DEVICES

TECHNOLOGICAL ADVANCEMENTS TO OVERCOME VISCOSITY CHALLENGES FOR INJECTABLE DEVICES

Joe Neale explores injectable drug development, delving into the intricacies of how technology is advancing to meet the challenges of administering complex formulations, enabling a more positive patient experience, promoting dosing compliance and maximising the benefits of these essential medicines.

GAS-POWERED AUTOINJECTOR PLATFORM ENABLES BIOLOGICS DRUG DELIVERY

GAS-POWERED AUTOINJECTOR PLATFORM ENABLES BIOLOGICS DRUG DELIVERY

Matt McCawley and Albie Lavin discuss Altaviz's universal biologics autoinjector platform, highlighting how its gas-powered drive system, based on Pico-Cylinders, provides numerous benefits over legacy spring-powered autoinjectors.

PICCOJECT – USING HUMAN FACTORS TO FULFIL PATIENTS’ NEED FOR INJECTION CONFIDENCE

PICCOJECT – USING HUMAN FACTORS TO FULFIL PATIENTS’ NEED FOR INJECTION CONFIDENCE

Thomas Thueer, Chris Muenzer and Ines Schlenker discuss the development of the enhanced usability features of PiccoJect, Haselmeier's novel autoinjector.

DEVICE INTERCHANGEABILITY STUDY OF THREE-STEP AND TWO-STEP AUTOINJECTORS

DEVICE INTERCHANGEABILITY STUDY OF THREE-STEP AND TWO-STEP AUTOINJECTORS

Alex Fong discusses the results of a study assessing patients’ ability to switch from a three-step autoinjector to a two-step device.

GX INBENEO<sup>®</sup> – DEVELOPING AN AUTOINJECTOR THAT RESPONDS TO THE CHALLENGES OF BIOLOGICS

Dr Daniel Primavessy

GX INBENEO^® – DEVELOPING AN AUTOINJECTOR THAT RESPONDS TO THE CHALLENGES OF BIOLOGICS

Daniel Primavessy, Sigrid Saaler-Reinhardt, Katarzyna Maksymowicz and Marie Stockton, Marketing Manager discuss how the Gx Inbeneo^® autoinjector from Gerresheimer was purpose designed to provide an effective, easy-to-use solution for the subcutaneous self-administration of sensitive biopharmaceuticals.

ACCELERATING ACCESS: THE FUTURE OF INJECTABLES IS PREFILLED AND PLASTIC – AN INTERVIEW WITH APIJECT’S BO KOWALCZYK & JON ELLENTHAL

ACCELERATING ACCESS: THE FUTURE OF INJECTABLES IS PREFILLED AND PLASTIC – AN INTERVIEW WITH APIJECT’S BO KOWALCZYK & JON ELLENTHAL

Bo Kowalczyk and Jon Ellenthal discuss the need for greater fill-finish capacity in the pharmaceutical industry highlighted by the covid-19 pandemic, and how ApiJect’s Blow-Fill-Seal prefilled injector platform aims to meet this need.

IDENTIFYING AND OVERCOMING THE CHALLENGES OF INJECTABLE COMBINATION PRODUCT EVOLUTION

IDENTIFYING AND OVERCOMING THE CHALLENGES OF INJECTABLE COMBINATION PRODUCT EVOLUTION

David DeSalvo considers some potential challenges that the rapid evolution of autoinjectors (and combination product injectables in general) raises, along with how the industry can successfully address this cycle of reinvention.

WHEN SECONDARY PACKAGING IS A PRIMARY CONCERN

INDUSTRIALISATION

WHEN SECONDARY PACKAGING IS A PRIMARY CONCERN

Mark Foster discusses the challenges to optimising primary and secondary packaging for parenteral drug delivery devices, including higher level challenges from the patient perspective, as well as how these challenges present opportunities for device developers to stand out in the market.

A NEW FRONTIER: SELF-ADMINISTRATION OF LYOPHILISED, LARGE-VOLUME SUBCUTANEOUS BIOLOGICS

Enable Injections

A NEW FRONTIER: SELF-ADMINISTRATION OF LYOPHILISED, LARGE-VOLUME SUBCUTANEOUS BIOLOGICS

Mehul Desai and Daniel Waites discuss the pros and cons of lyophilisation for biologic injectable drugs, and how Enable Injections’ enFuse device can provide an answer to the challenges of self-injection of large-volume and lyophilised biologics.

PRODUCT SHOWCASE: COMPLETE SYSTEM FOR STANDARD-COMPLIANT TESTING OF WEARABLE INJECTORS

PRODUCT SHOWCASE: COMPLETE SYSTEM FOR STANDARD-COMPLIANT TESTING OF WEARABLE INJECTORS

Specifically tailored to on-body delivery systems (OBDSs) / wearable injectors, ZwickRoell showcases its customised, comprehensive solution for performing functional tests in accordance with the ISO 11608-6 standard.

SUSTAINABLE DESIGN OF A DRUG DELIVERY DEVICE FOR BIOPHARMACEUTICALS

SUSTAINABLE DESIGN OF A DRUG DELIVERY DEVICE FOR BIOPHARMACEUTICALS

Maike Wolf and Marie Stockton discuss how sustainability is a fundamental strategic priority for Gerresheimer. They also highlight how eco-design principles have been applied to the development of an on-body injector for subcutaneous delivery of biopharmaceuticals.

COMPARISON OF MECHATRONIC VS MECHANICAL WEARABLE DRUG DELIVERY SYSTEMS

COMPARISON OF MECHATRONIC VS MECHANICAL WEARABLE DRUG DELIVERY SYSTEMS

Thomas Mayer, Nicolas Bailo and Martin Liniger highlight some of the key challenges that mechanical and mechatronic drug delivery systems must overcome when delivering large volumes of biologics subcutaneously and explain the solutions that Sonceboz has considered during the development process of the company’s large-volume injector.

EXTENDING PATIENT-FRIENDLY DRUG DELIVERY TO HIGH-VOLUME WEARABLE DEVICES

Dr Iris Schnitzler

EXTENDING PATIENT-FRIENDLY DRUG DELIVERY TO HIGH-VOLUME WEARABLE DEVICES

Iris Schnitzler discusses the benefits of on-body delivery systems, including the flexibility and convenience they bring to patients managing chronic conditions, and how the Sorrel platform overcomes some of the inherent complexities and challenges of developing such a device. Dr Schnitzler then goes on to speak with Bas van Buijtenen and Andrei Yosef about the Sorrel platform and how its integration within LTS supports the company’s fundamental objectives of enabling partners and empowering patients.

THE VERTIVA™ ON-BODY DELIVERY SYSTEM: EXPANDING OPPORTUNITIES IN HOME-BASED CARE

Stevanato Group

THE VERTIVA™ ON-BODY DELIVERY SYSTEM: EXPANDING OPPORTUNITIES IN HOME-BASED CARE

Adam Stops introduces Vertiva™, Stevanato Group’s next-generation on-body delivery system platform, and discusses how it meets the needs of pharma companies looking to deliver large-volume doses in a patient-centric manner.

CHRONIC PATIENTS AT THE CENTRE OF LARGE-VOLUME SC DELIVERY WITH A SUSTAINABLE ON-BODY INJECTOR

CHRONIC PATIENTS AT THE CENTRE OF LARGE-VOLUME SC DELIVERY WITH A SUSTAINABLE ON-BODY INJECTOR

Cécile Gross and Mark Tunkel discuss the role of patient-centricity in the development of Nemera’s sustainable on-body injector platform.

Technology Showcase: CCBio’s Felice Dose – Simplifying Subcutaneous Infusion

Technology Showcase: CCBio’s Felice Dose – Simplifying Subcutaneous Infusion

CCBio showcases Felice Dose, a revolutionary on-body injector (OBI) designed to address the challenges of traditional IV injections and SC drug administration.

INJECTING INNOVATIVE SOLUTIONS INTO CONNECTED DELIVERY DEVICES

INJECTING INNOVATIVE SOLUTIONS INTO CONNECTED DELIVERY DEVICES

Roger Bohannan discusses the capabilities and design challenges of connected drug delivery devices.

INCORPORATING MOTION DESIGN AT EARLY STAGES OF WEARABLE INJECTOR DEVELOPMENT

Dave Beckstoffer

INCORPORATING MOTION DESIGN AT EARLY STAGES OF WEARABLE INJECTOR DEVELOPMENT

Dave Beckstoffer discusses the often overlooked importance of including motion system design considerations from the very earliest stages of wearable injector development, and how doing so can reduce costs, shorten timelines and improve patient outcomes.

DIRECTIONS FOR WEARABLE ON-BODY INJECTOR SYSTEMS AND BEYOND

DIRECTIONS FOR WEARABLE ON-BODY INJECTOR SYSTEMS AND BEYOND

Matt Parker, Karthik Chellappan and David Cottenden discuss the current state of play for large-volume injection and look into the challenges that on-body delivery systems currently in development will need to overcome to find success in a changing marketplace.

WOULD YOU LIKE TO GO LARGE? KEY CONSIDERATIONS FOR LARGE-VOLUME INJECTORS

WOULD YOU LIKE TO GO LARGE? KEY CONSIDERATIONS FOR LARGE-VOLUME INJECTORS

Malcolm Boyd discusses the factors that need to be considered early in the development of large-volume injectors, which will have a major influence on the performance, usability and cost of a device.

Prev
1
…
7
8
9
10
11
…
62
Next

See what ondrugdelivery's readers and contributors think

Abby Lockwood
Consultant
Plan Strategic

ONdrugDelivery Magazine is a great resource that brings a lot of value to the work my team and I are doing in the area of drug delivery. The device-specific content as well as the broader discussions surrounding industry trends and issues are extremely informative and very well written.

Li-Chun Tsou, PhD, MBA
Principal Engineer
Merck & Co

Your website and publication is a great asset for me. I’d recommend your publication to my colleagues. I am sure that we will gain knowledge and update information through your timely report. Thanks for making it available.

Donna Bibber
President
Micro Engineering Solutions

I picked up your latest copy at the Boston PODD event and read it with great interest. You’ve really come a long way and you put out an amazingly professional and value-packed magazine.

Matt Kempton
Snr Project Engineer
Corning Incorporated

I am extremely impressed with the comprehensive presentation of information and problem/solution points detailed ... Kudos to you for an extremely well written article with succinct and robust scientific body of knowledge.

Top